WHAT IS Ajay Flowline Plus CPVC?

Ajay Flowline Plus pipe and fittings are made from a specialty plastic known chemically as chlorinated polyvinyl chloride (CPVC). Flowline Plus CPVC is the result of new technology that ensures increased products toughness year round. Ajay Flowline Plus CPVC pipes and fittings are designed for potable hot and cold water distribution and are assembled with commonly used inexpensive tools. CPVC fusion Compound Jointing-proven with more than 40 years of successful service history - assures the reliability of a Flowline Plus plumbing system.

CAN WE USE COMBINAION OF Ajay Flowline Plus WITH OTHER PIPNGS SYSTEMS?

Ajay doesn’t recommend such mix-n-match comination. In case. GI is used in a Plumbing Systems. All the advantages of Ajay Flowline Plus will be lost because of contamination from the rust and other issues with GI pipes. UPVC pipes are not designed and cannot be used for Hot water distribution. Many times during peak Summer, water from the overhead tanks becomes hot. Sometimes even the back flow of Hot water from geyser can adversely affect the UPVC system. Further there is always a chance or the heating device {Geyser/ Solar Heater}, which may lead to failure of the system. Another issue is a chance the solvent-cement for CPVC and UPVC might get interchanged, which will cause system failure. In case. Lastly there is the problem of keeping inventory of different pipes, fittings, Fusion Compounds, installation tools and dealing with different suppliers, which will add to the cost

WHAT IS THE EXPECTED LIFE OF Ajay Flowline Plus CPVC?

CPVC has been in use successfully for the past 40 years. Flowline Plus Hot and Cold water Plumbing System has been designed for a service life of 50 years.

IS Ajay Flowline Plus COST EFFECTIVE?

CPVC has been successfully performing worldwide for over 40 years and Flowline Plus has a designed life of minimum 50 years. The system requires low initial investment and lowest installation cost and hence has one of the lowest lifetime ownership cost

HOW TO REPAIR THE PIPE IN CASE IT GET PUNCTURED WHILE NAILING/SCREWING ON THE WALL WITH CONCEALED PIPING?

Repairing of punctured & damaged pipe due to drilling/chiseling can be done by removing the cement plaster and using the pipe repair piece supplied by the company. Clean thoroughly the area of pipe damaged and make it dry. Apply solvent cement on the surface of pipe at damaged portion in the entire circumference. Also apply solvent cement on the inner surface of pipe repair piece and snap on over damaged area. Tie a small piece of string/binding wire around the repair piece and pipe for some time to allow to set. This is an unique system available with CPVC pipe where the damaged pipe need not be cut or shifted back & forth for repair. Do pressure test before re-plastering.

IS THE WATER PASSING THROUGH THE SOLVENT CEMENTED JOINTS SAFE FOR DRINKING?

Ajay Flowline Plus solvent cement is tested and certified by NSF of USA. NSF stands for National Sanitation Foundation and works for development of public health standards and certification programs that help protect the world’s food, water, consumer product and environment.