GULLY AND TRAPS

They are used to connect the drainage pipe to the underground drainage system and stop foul air escaping from drinage


Bottle Gully

[65mm Water Seal]

Bottle Gullies can be used to remove surface water from paved pedestrain area and are designed to accept the waste water from kitchen,utilityroom,ground floor bathroom or rain water from paved areas or roof. They have a back inlet which can be connected to waste water or rainwater pipes. The advantage of Bottle gully is that it provide better access for cleaning and rodding of outlet pipe.Bottle gully comes with round grid[jali] at the top of surface water removal. The grid includes a provision to cut holes for pipe insertion

Low height P-Trap

[60 mm Water Seal]

Have a vertical inlet[110mm] and a horizontal outlet[110mm] can be assembled with an optional square hopper for surface water removal.The hopper may be a solvent weld with a 110mm peice of pipe and inserted into a P-Trap to achieve desired height as per the ground condition

OptionalSquare Hopper are supplied with open grids[Jali] which snap into place

Long height P-Trap

[50mm Water Seal]

Have a vertical inlet[110mm] and a horizontal outlet[110mm].

Can be assembled with optional square hopper for surface water removal.The hopper may be solvent weld with a 110mm peice of pipe and inserted into P-Trap to achieve the desired height as per ground condtions

Optional:Square Hopper are supplied with open grids[jali] which snap into place

Non-Return Valve


This is simple and effective device that reduces the risk of damage to property due to flooding that may be caused due to surface water and foul water flow back through tha underground drinage system.It is made using high quality of UPVC materials and is designed in accordance with the European standard.The use of a non-return valve outside the building prevents any external drainage issues backing up into property

Should be Installed within an the access point between the facility to be protected and the main sewer, any flowback will automatically shut the valve

Should be Installed in a pumped drainage system, for example, where efflucent water is being pumped from a basement,The non-return valve will help protect the system in the event of power failure

Intergral closing handle allows the valve to be shut manually for easy system maintainance or cleaning.

A Non-Return valve also help in protection against rodent which should be considered especially for refurbishment product.

Swivel Adaptor

Swivel Adaptor is a device that facilities the jointing of pipes with the inspection chambers in the situations where it may not possible to perfectly align the pipe with one of inlets.The device comes with pre-installed DM-Seal for leak free Ring-Fit joint.

Material of Construction:PVC

Swivel angle:15 degree(in each direction)

Traps, Valves & Swivel Adaptor Table

BOTTLE GULLY TRAP WITH ROUND JALI-DOUBLE SIDE
ITEM CODE SIZE(Inch) SIZE(mm)
TGBWJD160110 6"*4"*4" 160*110*110
LONG BODY P TRAP(With 50MM Water Seal)
ITEM CODE SIZE(Inch) SIZE(mm)
TGLBPTW50110 4"*4" 110*110
LOW BACK P TRAP
ITEM CODE SIZE(Inch) SIZE(mm)
TGLOWBTRP110 4"*4" 110*110
NON RETURN VALVE
ITEM CODE SIZE(Inch) SIZE(mm)
TGNONRVAL110 4" 110
TGNONRVAL160 6" 160
HOPPER WITH SQUARE JALI
ITEM CODE SIZE(Inch) SIZE(mm)
TGHPRSQJL110 4" 110
SWIVEL ADAPTOR
ITEM CODE SIZE(Inch) SIZE(mm)
TGSWVADPT110 4" 110
TGSWVADPT160 6" 110